Session 34`

• Hours: 2.75
• Total Hours: 73.5

1.  Tinkered with rigging a little bit and sorted out the barber hauler rigging.
2. Cut out the rings for the telescoping beams and fiber-glassed outside.
3. Laminated the centerboard case into the boat on top of the trunk.
4. Drilled holes for 3/8" bolts to secure inner beam tubes to out beam tubes.
5. Fit rudder
6. Glassed aft deck and transom
7. Fit inspection port for rudder
8. Mounted 1.5" ball for mast base