- Hours: 4
- Total: 34.5
- Hole for pole receptacle
- Fill back of cockpit coamings with goop - cutting mistake with cut-outs on all coaming panels.
- Mounts for anchor
- Mast support vertical and athwartships
- Mount centerboard trunk
- Fit hole in cockpit floor to fit well of centerboard
- Cut out hull supports for Nacra 5.2 hulls.
Look at the end of the beam before caps.
Anchor on mounts
Centerboard well and trunk dry fitted in cockpit
Quick look at everything pre-assembled
Centerboard trunk sticking out the bottom. Well be trimmed when boat flipped.
Centerboard trunk tacked in place
Nacra 5.2 Hulls. 75 pounds each I would guess.
CNC milling of the Nacra chocks
Spinnaker pole receptacle dry fitted
Spinnaker pole receptacle dry fitted.
No comments:
Post a Comment